The Ghost Immobiliser
Immobilisers are a potent tool to fight vehicle theft. They stop the vehicle from starting if it isn't equipped with an ignition key fob. They also work well to stop hotwiring and other traditional methods of vehicle theft. Newer methods such as relay theft or key cloning are becoming more common.
Designed to combat these recent trends The ghost immobilise r works to make your vehicle completely unnoticeable. It doesn't use LED indications, radio signals or key fobs, and is quiet and stealthy.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA approved product and insurance companies also endorse it. It is almost undetectable by thieves and operates in silence. It makes use of buttons on your steering wheel, the centre console, and doors to create an unique pin code sequence that has to be entered before you can start your vehicle. You can create up to 20 different sequences in order to increase security. The system is simple to set up and does not require any additional hardware or wiring.
It is recommended that you use an authorised installer of CAN immobilisers that is skilled in the specific type of vehicle you have to ensure the most effective results. Ideally, they will have a workshop close to you where you can go to get your installation done. You can also find an array of tools and equipment that can assist you in the installation. They will have basic hand tools, a multimeter and insulation tape as well as heat shrink tubing to secure the connections. A user's manual will give specific instructions for the wiring in your vehicle.
Disconnect the battery before beginning the installation process to avoid short circuits or airbag deployment. Double-checking the CAN L and H wires is essential, as incorrect identification can cause a misalignment of the system. It is also a good idea to mark the wires using small bits of tape or mark them. Use a multimeter to confirm that the power source is supplying the same 12V.
Advanced thieves can use various methods to evade Ghost Immobilisers. This includes jamming or spoofing. These methods involve amplifying signals from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming techniques and vigilant monitoring, your vehicle can be protected from these sophisticated attacks.
Security Enhanced
Ghost immobilisers provide an additional layer of protection to guard your car from theft. It has an PIN security system that is entered by pressing buttons on your dashboard or steering wheel making it difficult for thieves to take your vehicle. The device is designed to be hidden within your vehicle. It doesn't have any LEDs, or other signals to alert a potential burglar to its presence. It connects directly to the ECU of your car via the data bus. This means it isn't vulnerable to relay attacks or hacking.
The system is an excellent investment for those who own prestige cars, since they are at a higher risk of theft due to their value and their popularity. Its advanced features shield your car from key cloning and ECU swapping. Some ghost immobilisers are connected to apps, which means you can arm or disarm quickly. They can be equipped with a service/valet option that allows you temporarily deactivate the immobiliser during repairs or maintenance.
Another advantage of ghost immobilisers is that it does not require any wire cutting. This is a great feature, especially if your vehicle is newer and doesn't include an immobiliser. Certain systems might also be capable of integrating with the GPS tracking device, providing additional security for your vehicle. A GPS tracker can also reduce your insurance rates. If you decide to purchase ghost immobilisers be sure it is TASSA certified and a professional installer will install it for you.
Compatible with all major models and brands
The Ghost Immobiliser was designed to work with all major models and makes, securing your precious possessions from theft. It creates a unique pin code by pressing buttons on your steering wheel, console, or door panels. You must enter the code before you can drive. The system is tamper proof unbreakable and comes with three-year guarantee. It is also fully certified by insurance companies This means that it can help to reduce your premiums.
The Ghost system is different from standard immobilisers that use the key fob for ignition control. It is directly connected to the engine controller through the CAN bus. It is almost impossible to disable, remove or hack. The Ghost system can also be paired with an iPhone app to monitor remotely and management.
You can create a PIN code that is simple for you to remember but mathematically, it is impossible for thieves to determine. The PIN can be customised and changed at any point so that you can keep your car safe even when it's parked on the streets or in a public parking lot. You can also choose a valet or service mode in the event that someone else requires your vehicle temporarily or when it's in the garage. This is a great way to prevent your car from being stolen by an unscrupulous mechanic. You can select the Ghost Call alert to give you more security. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser is a highly effective security system, securing your vehicle against common methods of theft like key cloning and relay attacks. It is activated by connecting to the car's CAN data network and blocking communication with the engine ECU. This makes it difficult for thieves to copy or hack your car, making the installation of this system a good idea for any driver.
Once installed, you'll have to enter a pin number of up to 20 digits in length using the buttons on the dashboard and steering wheel to begin the vehicle. The system is completely concealed and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It can also be configured to allow change the PIN of the user, which adds security. The system is also designed to prevent cutting of circuits, making it virtually impossible to tamper with.
Certain systems let you communicate directly with the immobiliser using an app on your smartphone to disarm it immediately when you forget your PIN. Some come with a service/valet mode that allows you to start your car temporarily, for instance, when you have to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also undetectable to thieves because it does not transmit radio signals, which is a significant benefit over other aftermarket car security systems. It is also easy to use and doesn't require complex wiring. You can also use it in conjunction with a dash cam to provide additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can be wired to guarantee maximum performance and longevity.
Installation
It is crucial to select the best immobiliser ghost to protect your car from thieves. This device will prevent car thefts by blocking the communication between key fobs as well as the engine controller unit. This device prevents thieves from stealing the signal that allows you to start your vehicle. It can also detect any time it has been tampered with and alert the owner of the vehicle.
The device is easy to install and works with the existing systems of your vehicle. It doesn't require any modifications to the vehicle's wiring and can be concealed in a hidden area, like under the dashboard. To make sure that the device is properly installed, follow the instructions in the manual for the user. After installation, it's essential to test the system. This will ensure the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 immobiliser, and have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to remove or bypass the system. The installation process typically takes between 2 and 3 hours.
When installing the Ghost, it is recommended to look up the wiring diagram for the vehicle model you are using. This will help you locate the CAN High and CAN Low wires required to connect the Ghost to the engine of your vehicle. It is also essential to double-check the connections to make sure that they are safe and well-insulated.
Once the installation has been completed, you are able to start using the Ghost Immobiliser in a normal manner. It will shut off the ignition of your vehicle in the event that it is not started with the correct PIN code, which you can create yourself. The ghost immobiliser cost can also be put into service/valet mode when you have to surrender your vehicle for servicing or valet parking.